PROTIXX BRM is a low-foaming pH neutral floor cleaning agent for mechanical removing of difficult dirt soling from water-friendly surfaces.

P ROTIXX BRM removes paint residues due to its special ingredients, critical colour pigments, soot, waxes, separating agents and lubricants of any kind, even in cold cleaning process.

P ROTIXX BRM is bio-degradable to the extent of over 90%, non-toxic, non-corrosive, solvent-free and guaranteed free of labelling obligation. Conventional solvent-based cold cleaner can be replaced hereby.

Application:

Apply PROTIXX BRM as a dilution 1:5 to 1:200, depending on the degree of soiling, hot water increases cleaning effectiveness, leave to act for 2 – 10 minutes the remove.

For high-pressure cleaners use a 1+3 pre-dilution, then 1-5%. For pre-spraying use a dilution of 1:5 to 1:20. 

1 L is sufficient for cleaning approx. 40 m² with a 4%pre-dilution (1+3) of a medium soiled area.

For partial cleaning apply a 1:5 to 1:20 dilution.

Ingredients according to EC-Detergents Regulation:

< 5% non-ionic surfactants, < 5% amphoteric surfacants, < 5% phosphonates, water, fragrance, colourants and excipients.

Is suitable for the cleaning of homogeneous, closed surfaces such as:

Metal, PE, PP, PVC, vinyl, PU, polyester, epoxy, linoleum, sealed wood, porcelain, glass, ceramics, glazed tiles.

PROTIXX BRM is also suitable for the cleaning of smooth, porous surfaces such as:

 Marble, limestone, granite, sandstone, porphyry, slate, clinker, clay, concrete.

PROTIXX BRM is under reserve suitable (after impact assessment) for the cleaning of:

 unsealed wood, textile wool coatings, coconut, sisal or velour.